Sign up Latest Topics

  Author   Comment  
Kurt Becker

Avatar / Picture

Dramm Staff
Posts: 177
Reply with quote  #1 
While a pressure problem can always be failing seals from wear over time, sometimes it can be as simple as the pressure regulator knob not reaching the bottom.

The knob comes with a metal tab that allows the knob to be locked tight at lower pressures. This allows for flexibility when spraying.

Unfortunately, it could slip down unintentionally, causing the pressure to not reach full pressure.

To prevent this, make sure that the metal tab on the screw under the red knob is threaded completely to the top until it won't turn further. You can then adjust the pressure as normal and should reach the maximum limit of the regulator.

Kurt Becker
Dramm Corporation
Previous Topic | Next Topic

Quick Navigation:

Easily create a Forum Website with Website Toolbox.