Sign up Latest Topics
 
 
 


Reply
  Author   Comment  
Kurt Becker

Avatar / Picture

Dramm Staff
Registered:
Posts: 152
Reply with quote  #1 
If you are experiencing undue wear on the plastic parts in the nozzle assembly such as the locking ring, the swivel joints or the nozzle itself, this is most likely due to over-pressurization of the air system.

This causes the air to compress and heat up, eventually melting these parts.

DO NOT RUN the TracFOG at a pressure higher than 0.6 bar using the air gauge onboard.


__________________
Kurt Becker
Dramm Corporation
920/645.6417
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.