Sign up Latest Topics
 
 
 


Reply
  Author   Comment  
Unregistered
Reply with quote  #1 
Hello,

I have been quite disappointed in the quality of construction on the #300 brass valve recently. I had a brand new one today that lasted less than 4 hours before the innards spilled out somewhere between the greenhouse and my office.  Sad!

Corey Hill
Skagit Horticulture
Kurt Becker

Avatar / Picture

Dramm Staff
Registered:
Posts: 169
Reply with quote  #2 
Hello Corey,

Thanks for your post. The #300 Shut Off has not changed in a number of years.  I suspect what has happened is actually the result of an intentional feature, not a defect.

We build our brass shut-off to be easily rebuildable so that growers can replace parts rather than replace the whole valve as components wear. The innards of the valve are held in place by the washer. This should keep the nylon seal secure as it is generally a tight fit.  After some compression, will will begin to flatten out and loosen up. I suspect that the washer was either missing or loose and this allowed the seal to fall out. 

To replace the ball, you would remove the washer and turn the handle to the off position and the ball will slide out as well.

We can get you replacement parts for the components that are missing. 

We will reach out offline to handle this.



__________________
Kurt Becker
Dramm Corporation
920/645.6417
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.